Obtaining of ferro–tungsten under pressure from raw materials with the low maintenance of tungsten and a tungsten breakage
Abstract
On the basis of the analysis of references about influence of pressure on course metal–thermal processes and of works Open Company "Флога" on obtaining of ferromolybdenum and ferrotitanium the obtaining process of reception of ferrotungsten in crucibles under the pressure has been chosen, allowing at the expense of arising pressure to suppress disorder of a reacting mix and to reduce losses of the basic material on evaporation
References
2. Беляев А.Ф., Комкова Л.Д. // ЖФХ. 1950. – Т.34, – Вып.11. – С.1302–1311.
3. ISSN 0967–0912, Steel in Translation, 2008, Vol. 38, No. 6, pp. 470–474. © Allerton Press, Inc., 2008. S.M. Nekhamin, 2008, published in ―Stal’,‖ 2008, No. 6, P.43–47.
4. Плинер Ю.Л., Сучильников С.И. К вопросу о факторах, определяющих температуру внепечной алюминотермической плавки. – М.: Черная металлургия, 1961, № 1.
5.Мержанов А.Г., Юхвид В.И., Боровинская И.П. Саморастространяющийся високотемпературный синтез чистых тугоплавких неорганических соединений. // Доклад АН СССР. – т. 225, № 1, 1980, С.120–124.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-NC-ND 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.