Determination of complete polyethylene waste combustion mode

  • Meruyert Nazhipkyzy al-Farabi Kazakh National University, Almaty
  • Bakytzhan Tastanovich Lesbayev al-Farabi Kazakh National University, Almaty
  • Gaukhar Tolbayevna Smagulova al-Farabi Kazakh National University, Almaty
  • Ayagoz Yessenbaikyzy Bakkara al-Farabi Kazakh National University, Almaty
  • Zulkhair Mansurov al-Farabi Kazakh National University, Almaty
  • Nikolay Georgiyevich Prikhodko al-Farabi Kazakh National University, Almaty
  • Tolganay Serikovna Temirgaliyeva al-Farabi Kazakh National University, Almaty
DOI: https://doi.org/10.15328/chemb_2014_293-99
Keywords: superhydrophobic soot, polyethylene waste, flame, combustion mode, catalysts

Abstract

Nowadays the investigation of soot formation process into flame does not lose its importance. Moreover in the present time processing and use of household residues is one of the most important problems on the world level. This paper is devoted to the synthesis of superhydrophobic soot by burning polyethylene waste and determine of combustion mode for its complete combustion.

In the process of producing soot having a superhydrophobic properties by burning of polyethylene wastes the experiments were performed with a reduction of carcinogenic, pollutants, and with different catalysts. For provide the selectivity and rise effectiveness of the catalyst were conducted the activation process (etching). For establishing a complete information about the structure and chemical composition of the obtained soot was investigated by physico-chemical methods.  SEM, IR-spectroscopy, Raman spectroscopy.

Author Biographies

Meruyert Nazhipkyzy, al-Farabi Kazakh National University, Almaty
Department of Chemical Physics and Materials Science, Docent
Bakytzhan Tastanovich Lesbayev, al-Farabi Kazakh National University, Almaty
Department of Chemical Physics and Materials Science, Docent
Gaukhar Tolbayevna Smagulova, al-Farabi Kazakh National University, Almaty
Department of Chemical Physics and Materials Science, Ph.D. student
Ayagoz Yessenbaikyzy Bakkara, al-Farabi Kazakh National University, Almaty
Department of Chemical Physics and Materials Science, Ph.D. student
Zulkhair Mansurov, al-Farabi Kazakh National University, Almaty
Department of Chemical Physics and Materials Science, Professor
Nikolay Georgiyevich Prikhodko, al-Farabi Kazakh National University, Almaty
Institute of Combustion Problems, Head of Laboratory "Synthesis of Carbon Nanomaterials in Flame"
Tolganay Serikovna Temirgaliyeva, al-Farabi Kazakh National University, Almaty
Department of Chemical Physics and Materials Science, Master student

References

1. Sayangdev N, Swarnendu S, Ishwar KP (2007) Carbon 45:1696–1716. http://dx.doi.org/10.1016/j.carbon.2007.04.033

2. Levesque A, Binh VT, Semet V, Guillot D, Fillit RY, Brookes MD, Nguyen TP (2004) Thin Solid Films 464–465:308–314. http://dx.doi.org/10.1016/j.tsf.2004.06.012

3. Sen S, Puri IK (2004) Nanotechnology 15:264–268. http://dx.doi.org/10.1088/0957-4484/15/3/005

4. Mansurov ZA, Nazhipkyzy M, Lesbayev BT, Prikhodko NG, Chernoglazova TV, Chenchik DI, Smagulova GТ (2012) Synthesis at Superhydrophobic Soot Flames and its Applied Aspects. Abstracts of World (International) Conference on Carbon. Krakow, Poland. ID 768.

Published
2014-07-07
How to Cite
Nazhipkyzy, M., Lesbayev, B., Smagulova, G., Bakkara, A., Mansurov, Z., Prikhodko, N., & Temirgaliyeva, T. (2014). Determination of complete polyethylene waste combustion mode. Chemical Bulletin of Kazakh National University, 74(2), 93-99. https://doi.org/https://doi.org/10.15328/chemb_2014_293-99
Issue
Vol 74 No 2 (2014): Chemical Bulletin of Kazakh National University
Section
Colloid and Nano Chemistry
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-NC-ND 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.