Effect of carbon nanomaterials additives on the properties of epoxy composites

  • D. Dinistanova Institute of Combustion Problems, Almaty
  • S. Таnirbergenova Institute of Combustion Problems, Almaty
  • Zulkhair Маnsurov Institute of Combustion Problems, Almaty

Abstract

The possibility of using CNM synthesized by pyrolysis, as a modifier when creating new PCM-based epoxy resin and carbon reinforcing filler. It is established that the introduction of CNM as fillers leads to an increase in bending fatigue stress at 28% compression at 38% and at break of 14%. Determined that the fire resistance of composites increases with the number of input CNM.

Author Biographies

D. Dinistanova, Institute of Combustion Problems, Almaty
al-Farabi Kazakh National University
S. Таnirbergenova, Institute of Combustion Problems, Almaty
al-Farabi Kazakh National University
Zulkhair Маnsurov, Institute of Combustion Problems, Almaty
al-Farabi Kazakh National University

References

1. Мансуров З. А. Образование сажи, полициклических ароматических углеводородов, фуллеренов и углеродных нанотрубок при горении углеводорода // Инженерно-физический журнал, М., 2011. – Т.84, № 1. - С.111-145.

2. Грачев В.П., Акатентов Р.В., Алексашин В.Н., Богатов Б.А., Кондрашов С.В., Раков Э.Г., Аношкин И.В. // Влияние малых добавок функционализированных многослойных углеродных нанотрубок на кинетику отверждения и свойства эпоксидных композитов // Сборник тезисов докладов участников Второго Международного форума по нанотехнологиям, 2009, С. 301-303.

3. Breuer O., Sundararaj U. Big returns from small fibers: a review of polymer/carbon nanotubes composites // Polym. Compos. - 2004. - Vol. 25, № 6. - Р. 630-645.

Published
2012-03-31
How to Cite
Dinistanova, D., ТаnirbergenovaS., & МаnsurovZ. (2012). Effect of carbon nanomaterials additives on the properties of epoxy composites. Chemical Bulletin of Kazakh National University, 65(1), 55-58. https://doi.org/https://doi.org/10.15328/chemb_2012_155-58